• Head Office : +44 2038076162
  • sales@flameguarduk.com
Compare

Smoke Detector Tester FL900SD

instructions for use

this tester is UL compatible for testing a fire alarm detector’s function per NFPA 72 and for use white smoke alarms listed to UL standard 217 and 268 when used as follows:

from a distance of 2 to 4 ft (0.6-1.2m) aim spray for 1-2 seconds at the vents or side of the detector.

when using this product in an enclosed dispenser device only 1.2 to 1 second spray is typically required to activate alarm.

Alarm will sound within 1 to 10 seconds if the detector is functions properly unless the detector has a built in delay circuit

detectors with delay circuits should be sprayed 1 or 2 extra times to activate the alarm.

when activated, detector should alarm for 10 to 15 seconds

Description

caution:

extermely flammable

contain gas flammable

contents under pressure

contents of the container can ignite under certain circumstances.

do not use near fire, heat, spark, open flame or while smoking.

do not puncture or incinerate container even when empty.

store at temperatures below 40°c (140°c).

avoid spraying in eyes.

use only as directed.

use and store only in well ventilated area

intentional mis use by deliberately concentrating and/or inhaling can be harmful or fatal

kEEP OUT OF THE REACH OF CHILDREN

note: excessive spraying may affect the detector is sensitivity

no liability can be accepted for incorrect use

Reviews

There are no reviews yet.

Be the first to review “Smoke Detector Tester FL900SD”

Your email address will not be published. Required fields are marked *

QR Code

QR Code